• Test suite verifies against MongoDB 4.4 5.0 6.0

• The tests expect two mongods running, with and without authentication. A utility script (test_containers.sh) will boot these as docker containers.
• Supports Pekko 1.0.0
• Test suite runs against MongoDB major versions 4.4, 5.0, 6.0
• Cross-compiled against scala 2.12, 2.13 and 3 - WARNING in the case of Scala 3 this library uses 2.13 version of mongo-scala-driver, because it is not yet available for Scala 3.
• Be aware that there is a 16MB payload size limit on snapshots and journal events. In addition a journal batch must be <= 16MB in size. A journal batch is defined by the Seq of events passed to persistAll.

• Add the following to sbt:

libraryDependencies +="com.github.scullxbones" %% "pekko-persistence-mongodb" % "1.1.0"

• Inside your application.conf file, add the following line if you want to use the journal (snapshot is optional).
  The driver selection should be pulled in by a reference.conf in the driver jar you choose:

pekko.persistence.journal.plugin = "pekko-contrib-mongodb-persistence-journal"
pekko.persistence.snapshot-store.plugin = "pekko-contrib-mongodb-persistence-snapshot"

1. Apache Pekko support
2. Configuration Details
   • Mongo URI
   • Collection and Index
   • Collection Caches
   • Write Concerns
   • ReactiveMongo Failover
   • Stream buffer size
   • Dispatcher
   • Pass-Through BSON
   • Legacy Serialization
   • Metrics
   • Multiple plugins
   • Casbah/Official Scala Client Settings
3. Suffixed collection names
   • Overview
   • Usage
   • Details
   • Migration tool

• The aim of this fork of the akka-persistence-mongo library is to provide a MongoDB persistence plugin for Apache Pekko 1.0.0

If previously the akka-persistence-mongo library was used together with Akka and Akka-Persistence and now the complete stack should be migrated to Pekko, Pekko-Persistence and pekko-persistence-mongo as a replacement, the following section describes migration steps to take.

If you are using a feature of Akka that uses persistence under the hood and potentially persists the full Akka class name as a part of the persistence data (classic PersistentFSM is a known example), then this module will implicitly translate that data when reading to the Pekko class name to be able to deserialize it and keep compatibility. The opposite is true if you migrate and find an issue with your Pekko migration and need to roll back, but your application has already persisted entries with the new Pekko class name. The same functionality has been backported to allow rolling back your application, but you must be on a minimum akka-persistence-mongo version of 3.1.0 to have this translation.

The root configuration key changed from akka to pekko, so adjust your configuration accordingly, e.g.
from:

akka.contrib.persistence.mongodb.mongo.mongouri = "xxx"

to:

pekko.contrib.persistence.mongodb.mongo.mongouri = "xxx"

This fork for Pekko adjusts the default collection names. The previous (in akka-persistence-mongo) default collection names were:

akka {
  contrib {
    persistence {
      mongodb {
        mongo {
          journal-collection = "akka_persistence_journal"
          journal-index = "akka_persistence_journal_index"

          snaps-collection = "akka_persistence_snaps"
          snaps-index = "akka_persistence_snaps_index"

          realtime-collection = "akka_persistence_realtime"

          metadata-collection = "akka_persistence_metadata"
        }
      }
    }
  }
}

The new default collection names are (see also reference.conf):

pekko {
  contrib {
    persistence {
      mongodb {
        mongo {
          journal-collection = "pekko_persistence_journal"
          journal-index = "pekko_persistence_journal_index"

          snaps-collection = "pekko_persistence_snaps"
          snaps-index = "pekko_persistence_snaps_index"

          realtime-collection = "pekko_persistence_realtime"
          
          metadata-collection = "pekko_persistence_metadata"
          metadata-index = "pekko_persistence_metadata_index"
        }
      }
    }
  }
}

Unless in the previous use of akka-persistence-mongo the default collection names were already adjusted and overwritten, the collection names of pekko-persistence-mongo have to be adjusted to the previous (akka- prefixed) ones.
This can e.g. be done by adding the following configuration:

pekko.contrib.persistence.mongodb.mongo.journal-collection = "akka_persistence_journal"
pekko.contrib.persistence.mongodb.mongo.journal-index = "akka_persistence_journal_index"
pekko.contrib.persistence.mongodb.mongo.snaps-collection = "akka_persistence_snaps"
pekko.contrib.persistence.mongodb.mongo.snaps-index = "akka_persistence_snaps_index"
pekko.contrib.persistence.mongodb.mongo.realtime-collection = "akka_persistence_realtime"
pekko.contrib.persistence.mongodb.mongo.metadata-collection = "akka_persistence_metadata"
pekko.contrib.persistence.mongodb.mongo.metadata-index = "akka_persistence_metadata_pid"

Apart from that, no other migration steps are currently known.

A mongo uri can be specified. This must meet the requirements of Mongo's uri format.

For example mongodb://user:secret@localhost:27017/my-pekko-persistence. If the database name is unspecified, it will be defaulted to pekko-persistence.

pekko.contrib.persistence.mongodb.mongo.mongouri = "mongodb://user:[email protected]:27017,192.168.0.2:27017/replicated-database"

If a user, password, and database are specified, the database will be used both as a credentials source as well as journal and/or snapshot storage.
In order to use a separate database for data storage, one can provide this with the following configuration item:

pekko.contrib.persistence.mongodb.mongo.mongouri = "mongodb://user:password@localhost/credential-database"
pekko.contrib.persistence.mongodb.mongo.database = "storage-db"

Proper MongoDB user permissions must be in place for the user to be able to access storage-db in this case

A DB name can be specified, as can the names of the collections and indices used (one for journal, one for snapshots).

pekko.contrib.persistence.mongodb.mongo.journal-collection = "my_persistent_journal"
pekko.contrib.persistence.mongodb.mongo.journal-index = "my_journal_index"
pekko.contrib.persistence.mongodb.mongo.snaps-collection = "my_persistent_snapshots"
pekko.contrib.persistence.mongodb.mongo.snaps-index = "my_snaps_index"
pekko.contrib.persistence.mongodb.mongo.metadata-collection = "my_metadata_collection"
pekko.contrib.persistence.mongodb.mongo.metadata-index = "my_metadata_index"
pekko.contrib.persistence.mongodb.mongo.journal-write-concern = "Acknowledged"

The persistence plugin caches all collections it creates. As long as a collection remains in cache, the plugin will not re-create or re-index it for each access, which would cause unnecessary write-locks. By default, collection caches keep their entries forever and have unbounded memory consumption. It is best to implement your own collection cache if you enable suffixed collection names.

Collection cache implementations should extend the trait MongoCollectionCache and have a public constructor receiving a Config object as argument. There are separate configurations for caches of journal, snapshot, realtime and metadata collections.

Default caches keep collections no longer than the duration specified in the configuration expire-after-write; setting it to a finite duration ensures that collections are eventually created with the correct options and indexes. Setting max-size=1 restricts the number of cached collections to 1; this is useful for realtime and metadata collections or when suffixed collection names is disabled.

pekko.contrib.persistence.mongodb.mongo {
  # Caches of collections created by the plugin
  collection-cache {

    # Cache of journal collections
    journal {
      # Implementation of the cache.
      # - Must be a subtype of MongoCollectionCache.
      # - Must have a public constructor taking a Config object as argument.
      # - Must be able to store the collection type of the chosen driver.
      #
      # If left empty, a default naive implementation with unbound memory consumption is used.
      class = ""

      # How long to retain the collection. Invalid or missing durations are treated as eternity.
      expire-after-write = Infinity
    }

    # Cache of snapshot collections
    snaps {
      class = ""
      expire-after-write = Infinity
    }

    # Cache of one realtime collection
    realtime {
      class = ""
      expire-after-write = Infinity

      # maximum size of the cache
      # 1 because the realtime collection is unique
      # default caches do not honor size bounds bigger than 1
      max-size = 1
    }

    # Cache of one metadata collection
    metadata {
      class = ""
      expire-after-write = Infinity

      # maximum size of the cache
      # 1 because the metadata collection is unique
      # default caches do not honor size bounds bigger than 1
      max-size = 1
    }
  }
}

This is well described in the MongoDB Write Concern Documentation

The write concern can be set both for the journal plugin as well as the snapshot plugin. Every level of write concern is supported. The possible concerns are listed below in decreasing safety:

• ReplicaAcknowledged - requires a replica to acknowledge the write, this confirms that at least two servers have seen the write
• Journaled - requires that the change be journaled on the server that was written to. Other replicas may not see this write on a network partition
• Acknowledged - also known as "Safe", requires that the MongoDB server acknowledges the write. This does not require that the change be persistent anywhere but memory.
• Unacknowledged - does not require the MongoDB server to acknowledge the write. It may raise an error in cases of network issues. This was the default setting that MongoDB caught a lot of flak for, as it masked errors in exchange for straight-line speed. This is no longer a default in the driver.
• ErrorsIgnored - !WARNING! Extremely unsafe. This level may not be able to detect if the MongoDB server is even running. It will also not detect errors such as key collisions. This makes data loss likely. In general, don't use this.
• Errors ignored is no longer supported as a write concern.

It is a bad idea™ to use anything less safe than Acknowledged on the journal. The snapshots can be played a bit more fast and loose, but the recommendation is not to go below Acknowledged for any serious work.

As a single data point (complete with grain of salt!) on a MBP i5 w/ SSD with Kodemaniak's testbed and mongodb running on the same physical machine, the performance difference between:

• Journaled and Acknowledged write concerns is two orders of magnitude
• Acknowledged and Unacknowledged write concerns is one order of magnitude

Journaled is a significant trade off of straight line performance for safety, and should be benchmarked vs. Acknowledged for your specific use case and treated as an engineering cost-benefit decision. The argument for the unsafe pair of Unacknowledged vs. Acknowledged seems to be much weaker, although the functionality is left for the user to apply supersonic lead projectiles to their phalanges as necessary :).

In addition to the mode of write concern, the wtimeout and fsync parameters may be configured seperately for the journal and snapshot. FSync cannot be used with Journaling, so it will be disabled in that case.

Default values below:

pekko.contrib.persistence.mongodb.mongo.journal-wtimeout = 3s
pekko.contrib.persistence.mongodb.mongo.journal-fsync = false
pekko.contrib.persistence.mongodb.mongo.snaps-wtimeout = 3s
pekko.contrib.persistence.mongodb.mongo.snaps-fsync = false

This functionality has effectively been removed with the change of live streams to open a cursor on the realtime collection with every read query.

The .dropTail behavior addressed by #192 is no longer present.

pekko-persistence-mongo uses streams to feed the read side with events. By default, the buffer's size is fixed at 1000 To modify the default value for a specific use case, you can add the following configuration lines in your application.conf.

pekko.contrib.persistence.stream-buffer-max-size.stream-buffer-max-size.event-by-pid = [your value]
pekko.contrib.persistence.stream-buffer-max-size.stream-buffer-max-size.all-events = [your value]
pekko.contrib.persistence.stream-buffer-max-size.stream-buffer-max-size.events-by-tag = [your value]
pekko.contrib.persistence.stream-buffer-max-size.stream-buffer-max-size.pid = [your value]

The name pekko-contrib-persistence-dispatcher is mapped to a typically configured ThreadPoolExecutor based dispatcher. More details on these settings can be found in the Akka Dispatcher documentation. For example the (by core-scaled) pool sizes can be set:

pekko-contrib-persistence-dispatcher.thread-pool-executor.core-pool-size-min = 10
pekko-contrib-persistence-dispatcher.thread-pool-executor.core-pool-size-factor = 10
pekko-contrib-persistence-dispatcher.thread-pool-executor.core-pool-size-max = 20

If you need to see contents of your events directly in database in non-binary form, you can call persist() with a specific type that corresponds to the driver you use:

• org.bson.BsonValue (using native scala driver)
• com.mongodb.DBObject (using casbah driver)
• reactivemongo.bson.BSONDocument (using reactivemongo).

case class Command(value: String)
case class SampleState(counter: Int, lastValue: Option[String])

class SampleActor extends PersistentActor {

  var state = SampleState(0,None)

  def updateState(event: DBObject): Unit = {
    state = state.copy(counter = state.counter + 1, lastValue = event.getAs[String]("value"))
  }

  val receiveCommand: Receive = {
    case Command(value) =>
      persist(DBObject("value" -> value))(updateState)
  }

  // receiveRecover implementation, etc rest of class
}

During replay, events will be sent to your actor as-is. It is the application's duty to handle BSON (de)serialization in this case.

This functionality is also exposed for snapshots.

Legacy serialization (0.x) can be forced via the configuration parameter:

pekko.contrib.persistence.mongodb.mongo.use-legacy-serialization = true

This will fully delegate serialization to pekko-serialization by directly persisting the PersistentRepr as binary. It can be used to carry over functionality that is dependent on the way that the 0.x series used to treat storage of events.

By default metrics depends on the excellent Metrics-Scala library which in turn stands on the shoulders of codahale's excellent Metrics library.

For this implementation, no assumptions are made about how the results are reported. Unfortunately this means you need to inject your own reporters. This will require you to refer to the extension in your own code, e.g.:

object MyApplication {

  val actorSystem = ActorSystem("my-application")
  val registry = MongoPersistenceExtension(actorSystem).registry
  val jmxReporter = JmxReporter.forRegistry(registry).build()
  jmxReporter.start()

}

Timers:

• Journal append
• Journal range delete
• Journal replays
• Journal max sequence number for processor query

Histograms:

• Batch sizes used for appends

If you don't want to use the default metrics library, you can also provide your own implementation of pekko.contrib.persistence.mongodb.MetricsBuilder which will then be used to build your implementation of pekko.contrib.persistence.mongodb.MongoTimer and pekko.contrib.persistence.mongodb.MongoHistogram.

To make pekko-persistence-mongo use your pekko.contrib.persistence.mongodb.MetricsBuilder implementation you need to specify the property: pekko.contrib.persistence.mongodb.mongo.metrics-builder.class with the full qualified class name of your implementation of pekko.contrib.persistence.mongodb.MetricsBuilder.

• Adding metrics to snapshotter
• Adding health checks to both

With the introduction of the journalPluginId and snapshotPluginId parameters as documented here, individual PersistentActors can select a particular plugin implementation.

This plugin supports multiple instances with different configurations. One use case may be pointing different actors at different databases. To specify multiple instances of this plugin, something like the following can be added to the application.conf:

# Supply default uri
pekko.contrib.persistence.mongodb.mongo.mongouri = "mongodb://defaultHost:27017/db1"

pekko-contrib-mongodb-persistence-journal-other {
  # Select this plugin as journal implementation
  class = "pekko.contrib.persistence.mongodb.MongoJournal"
  # Use delivered dispatcher
  plugin-dispatcher = "pekko-contrib-persistence-dispatcher"
  # Overrides to supply overridden parameters (can be anything)
  # - assumed config root is `pekko.contrib.persistence.mongodb.mongo`
  overrides = {
    mongouri = "mongodb://host1:27017/special"
  }
  # use this parametes to config pekko persistence
  circuit-breaker {
    max-failures = 10
    call-timeout = 10s
    reset-timeout = 30s
  }
  replay-filter {
    mode = repair-by-discard-old
    window-size = 100
    max-old-writers = 10
    debug = on
  }
}

pekko-contrib-mongodb-persistence-journal-other-snapshot {
  # Select this plugin as journal snapshot implementation
  class = "pekko.contrib.persistence.mongodb.MongoSnapshots"
  # Overrides to supply overridden parameters (can be anything) - config root is `pekko.contrib.persistence.mongodb.mongo`
  overrides = {
    mongouri = "mongodb://host1:27017/special"
  }  
  # use this parametes to config pekko persistence
  circuit-breaker {
    max-failures = 10
    call-timeout = 10s
    reset-timeout = 30s
  }
  replay-filter {
    mode = repair-by-discard-old
    window-size = 100
    max-old-writers = 10
    debug = on
  }
}

Given the above configuration, all PersistentActors will default to the "defaultHost db1" pair.

In addition, some can specify `journalPluginId = "pekko-contrib-mongodb-persistence-journal-other" and use the "host1 special" pair.

Some more information is covered in #43

The Official MongoDB Drivers that are used support various connection related settings, which can be overriden via typesafe config e.g. application.conf:

(Official Scala)

pekko.contrib.persistence.mongodb.driver.official {
  minpoolsize = 0
  maxpoolsize = 100
  waitqueuemultiple = 5
  serverselectiontimeout = 30seconds
  waitqueuetimeout = 2minutes
  maxidletime = 0
  maxlifetime = 0
  connecttimeout = 10seconds
  sockettimeout = 0seconds
  ssl = false
  sslinvalidhostnameallowed = false
  heartbeatfrequency = 10seconds
  minheartbeatfrequency = 500ms
}

Any settings provided in the configured mongouri connection string will override explicit settings.

EventsByTag queries as described in the akka docs are available for use. When payloads are wrapped in an instance of pekko.persistence.journal.Tagged, these tags are stored in the journal and can be used as part of a persistence query. In DDD context, tags correspond well to aggregate roots.

An example query is below. This is querying for all events tagged foo. Alternately, an offset can be passed (stored for example from a previous query). This offset is considered exclusive, so the query will restart at the next item (> rather than >= behavior).

    implicit val system = as
    implicit val am = ActorMaterializer()
    val readJournal = PersistenceQuery(system).readJournalFor[CurrentEventsByTagQuery](MongoReadJournal.Identifier)
    val result: Future[Seq[EventEnvelope]] = readJournal.currentEventsByTag("foo", Offset.noOffset).runWith(Sink.seq)

The mongo plugin understands either Offset.noOffset or an ObjectId offset. Importing pekko.contrib.persistence.mongodb will enhance the Offset companion with an extra method to produce an ObjectId offset generated from external means.

For offsets to operate correctly in a distributed environment, the system clocks of all journal-writing processes should be synchronized. In addition, ObjectIds will be sorted by their components described in the mongodb docs. This can cause events that are generated in the same second to be replayed out of strict temporal order.

Without any further configuration, events are stored in some unique collection, named by default "pekko_persistence_journal", while snapshots are stored in "pekko_persistence_snaps". This is the primary and widely used behavior of event sourcing through Pekko-persistence, but it may happen to be insufficient in some cases.

As described in issue #39, some kind of persistenceId mapping to collection names should do the trick, and this is what inspired the suffixed collection names feature development.

The main idea here is to create as many journal and snapshot collections as needed, which names are built from default (or configured) names, suffixed by a separator, followed by some information "picked" from persistenceId.

Additionally, we provide a trait called CanSuffixCollectionNames that should be extended / mixed in some class, leading to override:

• a getSuffixfromPersistenceId function allowing to "pick" relevant information from persistenceId
• a validateMongoCharacters function allowing to replace any MongoDB forbidden character (including the separator)

def getSuffixfromPersistenceId(persistenceId: String): String
def validateMongoCharacters(input: String): String

For example, say that:

• persistenceId is "suffix-test" for some PersistentActor
• separator is the underscore character
• getSuffixfromPersistenceId removes the string "-test" from any string passed in argument

journal name would be "pekko_persistence_journal_suffix" while snapshot name would be "pekko_persistence_snaps_suffix"

Some collections keep their name, respectively "pekko_persistence_realtime" and "pekko_persistence_metadata" by default. They remain out of suffixed collection names feature scope.

Using the suffixed collection names feature is a matter of configuration and a little code writing.

Inside your application.conf file, use the following lines to enable the feature:

pekko.contrib.persistence.mongodb.mongo.suffix-builder.separator = "_"
pekko.contrib.persistence.mongodb.mongo.suffix-builder.class = "com.mycompany.myproject.SuffixCollectionNames"

Nothing happens as long as you do not provide a class extending or mixing in pekko.contrib.persistence.mongodb.CanSuffixCollectionNames trait, nor if its getSuffixfromPersistenceId method always returns an empty string.

First line defines a separator as a String, but only its first character will be used as a separator (keep in mind that mongoDB collection names are limited in size) By default, this property is set to an underscore character "_".

Second line contains the entire package+name of the user class extending or mixing in pekko.contrib.persistence.mongodb.CanSuffixCollectionNames trait (see below).

Optionally, you can choose to drop empty suffixed collections once they are empty, in order, for example, not to fill your database with a great number of useless collections. Be aware, however, that the underlying process is built upon MongoDB non atomic count and drop operations that may lead to race conditions. To enable this feature, just add the following line to your application.conf file:

pekko.contrib.persistence.mongodb.mongo.suffix-drop-empty-collections = true

Add some com.mycompany.myproject.SuffixCollectionNames class in your code, extending or mixing in pekko.contrib.persistence.mongodb.CanSuffixCollectionNames trait:

package com.mycompany.myproject

import pekko.contrib.persistence.mongodb.CanSuffixCollectionNames

class SuffixCollectionNames extends CanSuffixCollectionNames {

    override def getSuffixfromPersistenceId(persistenceId: String): String = persistenceId match {
      // in this example, we remove any leading "-test" string from persistenceId passed as parameter
      case str: String if (str.endsWith("-test")) => str.substring(0, str.indexOf("-test"))
      // otherwise, we do not suffix our collection
      case _ => ""
    }

  override def validateMongoCharacters(input: String): String = {
    // According to mongoDB documentation,
    // forbidden characters in mongoDB collection names (Unix) are /\. "$
    // Forbidden characters in mongoDB collection names (Windows) are /\. "$*<>:|?
    // in this example, we replace each forbidden character with an underscore character   
    val forbidden = List('/', '\\', '.', ' ', '\"', '$', '*', '<', '>', ':', '|', '?')

    input.map { c => if (forbidden.contains(c)) '_' else c }
  }
}

Remember that always returning an empty String will not suffix any collection name, even if some separator is defined in the configuration file.

Keep in mind, while designing getSuffixfromPersistenceId and validateMongoCharacters methods, that there are limitations regarding collection names in MongoDB.
It is the responsibility of the developer to ensure that his getSuffixfromPersistenceId and validateMongoCharacters methods take these constraints into account.

Pay particularly attention to collection and index name length. For example, with default database, journals, snapshots and their respective indexes names, your suffix, obtained through getSuffixfromPersistenceId and validateMongoCharacters methods, should not exceed 53 characters long.

Writes remain atomic at the batch level, as explained above but, as events are now persisted in a "per collection manner", it does not mean anymore that if the plugin is sent 100 events, these are persisted in mongo as a single document.

Events are first grouped by collection, then batch-persisted, each group of events in its own correspondent suffixed journal. This means our 100 events may be persisted in mongo as several documents, decreasing performances but allowing multiple journals.

If enabled (via the pekko.contrib.persistence.mongodb.mongo.realtime-enable-persistence configuration property) inserts inside capped collection for live queries are performed the usual way, in one step. No grouping here, our 100 events are still persisted as a single document in "pekko_persistence_realtime" collection.

Instead of reading a single journal, we now collect all journals and, for each of them, perform the appropriate Mongo queries.

Of course, for reading via the "xxxByPersistenceId" methods, we directly point to the correspondent journal collection.

We provide a basic migration tool from 1.x unique journal and snapshot to suffixed collection names. Unless the migration of 0.x journal, this process cannot be performed on the fly, as it directly deals with (and builds) collections inside the database. So, yes, you have to stop your application during the migration process...

The main idea is to parse unique journal, pick up every record, insert it in newly created appropriate suffixed journal, and finally remove it from unique journal. We do the same for snapshots, and optionally remove all records from "pekko_persistence_metadata" collection, allowing it to be built again through usual event sourcing process...

Of course, this process would be very long, but thanks to aggregation, we actually "gather" records by future suffixed collection, then by persistence Id, append (i.e. INSERT) them in one step (meaning all records of each persistence Id) to that new suffixed collection, and remove (i.e. DELETE) them in one step, from unique original collection.

Additionally, we offer the possibility to try these INSERT and DELETE operations multiple times, as the process runs such operations in parallel and may lead to Mongo timeouts. We also offer the same possibility for removing all records from "pekko_persistence_metadata" collection (see configuration below)

In case running operations in parallel leads to Mongo overload (for example errors like com.mongodb.MongoWaitQueueFullException: Too many threads are already waiting for a connection) we provide the ability to really perform the migration in a "one at a time" manner. We then process one persistence Id after the other, and for each persistence Id, append (i.e. INSERT) one record after the other and, if successful, remove (i.e. DELETE) it just after it has been transferred.

So, we first "gather" records by persistence Id but not by future suffixed collection. This process is much longer but Mongo should never been overwhelmed.

Additionally, we offer the possibility to run operations in parallel, that is to process a predetermined amount of persistence Ids at the same time. Once all these persistence Ids are processed (we actually wait for the slowest) we handle the following ones. This allows to decrease migration duration a little bit and is actually a matter of tuning (as an example, migrating 33 millions records for about 500 persistence Ids that were never snapshotted (yes, it was due to a bug) with a parallelism of 50, took approximately 7 hours on a PC with 4 CPUs and a RAM of 8 Mo...)

• backup your database (use, for example, the mongodump command)
• stop your application
• update your configuration to prepare for migration (see below)
• run the migration tool (this may take a while)
• update your configuration again to remove migration process but keep suffixed collection names feature
• start your application

Optionally, you could perform the entire process on some dummy database and application running offline, for example to determine how long it takes.

Remember that you work directly inside the database, so do not forget about replication if you have several mongo servers...

From now on, we refer to unique journal as "pekko_persistence_journal" and unique snapshot as "pekko_persistence_snapshot" even if they could have different names through configuration (let's keep those explanations simple)

First of all, backup your database and stop your application.

Using the suffixed collection names migration tool is a matter of configuration and a little code writing, and the first thing you should do is enable the suffixed collection names feature as explained in suffixed collection names usage. From now on, we consider that you have provided appropriate properties in your application.conf file and written your getSuffixfromPersistenceId and validateMongoCharacters methods that do not always return an empty string (if they do, nothing will be migrated)

Design your getSuffixfromPersistenceId and validateMongoCharacters methods carefully, as this migration process does not work from suffixed collections depending on some getSuffixfromPersistenceId and validateMongoCharacters methods to new suffixed collections depending on some modified getSuffixfromPersistenceId and validateMongoCharacters methods !

Of course, once this is done, you should not start your application, unless you want to run some tests on some dummy database !

Add the following to your build.sbt file:

libraryDependencies += "com.github.scullxbones" %% "pekko-persistence-mongo-tools" % "0.0.1-SNAPSHOT"

Notice that even if you currently don't use it, migration process is performed through Official Scala driver.

Notice that if you use Official Scala driver, "org.mongodb.scala" %% "mongo-scala-driver" % "..." dependency should already be part of your build.sbt file.

Additionally, you may configure your logging system with INFO level for ScalaDriverMigrateToSuffixedCollections class, otherwise there will be no output to console or log files. With log4J, this should be done like that:

<logger name="pekko.contrib.persistence.mongodb.ScalaDriverMigrateToSuffixedCollections" level="INFO" />

Optionally, you can configure, through the following properties:

• in case you choose the normal migration:

  how many times INSERT and DELETE operations may take place:

pekko.contrib.persistence.mongodb.mongo.suffix-migration.max-insert-retry = 1
pekko.contrib.persistence.mongodb.mongo.suffix-migration.max-delete-retry = 1

Careful, the value 0 means unlimited retries (not recommended)

• in case you choose the heavy load migration:

  how many persistence Ids may be processed at the same time:

pekko.contrib.persistence.mongodb.mongo.suffix-migration.parallelism = 1

• in both cases:

  the ability to clear "pekko_persistence_metadata" collection (defaults to false) and how many attempts may occur:

pekko.contrib.persistence.mongodb.mongo.suffix-migration.empty-metadata = true
pekko.contrib.persistence.mongodb.mongo.suffix-migration.max-empty-metadata-retry = 1

Careful, the value 0 means unlimited retries (not recommended)

Choosing among normal or heavy load migration is done via the following property:

pekko.contrib.persistence.mongodb.mongo.suffix-migration.heavy-load = false

Provide an ActorSystem, instantiate a ScalaDriverMigrateToSuffixedCollections class and call its migrateToSuffixCollections method as shown in the very basic following example:

package com.mycompany.myproject.myapplication.main


import org.apache.pekko.actor.ActorSystem
val system: ActorSystem = ActorSystem("my system name", myConfig)

import pekko.contrib.persistence.mongodb.ScalaDriverMigrateToSuffixedCollections
try {
    Await.result(new ScalaDriverMigrateToSuffixedCollections(system).migrateToSuffixCollections, myDuration)
} catch {
    case t: Throwable =>
        println("Error occurred on migration to suffixed collections")
        t.printStackTrace()
}

Providing an ActorSystem depends on the manner your application is designed and is beyond the scope of this documentation.

Running this process, we should see something like this (remember to configure INFO level for ScalaDriverMigrateToSuffixedCollections class)

• in case you choose the normal migration:

2019-06-07  INFO - Starting automatic migration to collections with suffixed names
This may take a while...
2019-06-07  INFO -

JOURNALS: Gathering documents by suffixed collection names.  T h i s   m a y   t a k e   a   w h i l e  ! ! !   It may seem to freeze, be patient...

2019-06-07  INFO - Processing suffixed collection 'pekko_persistence_journal_foo1' for 1 documents...
2019-06-07  INFO - Processing suffixed collection 'pekko_persistence_journal_foo2' for 24 documents...
2019-06-07  INFO - Processing suffixed collection 'pekko_persistence_journal_foo3' for 74013 documents...
2019-06-07  INFO - Processing suffixed collection 'pekko_persistence_journal_foo4' for 54845 documents...
2019-06-07  INFO - 1 records were handled for suffixed collection 'pekko_persistence_journal_foo1'
2019-06-07  INFO - 1/1 records were successfully transferred to 'pekko_persistence_journal_foo1'
2019-06-07  INFO - 1/1 records, previously transferred to 'pekko_persistence_journal_foo1', were successfully removed from 'pekko_persistence_journal'
2019-06-07  INFO - 24 records were handled for suffixed collection 'pekko_persistence_journal_foo2'
2019-06-07  INFO - 24/24 records were successfully transferred to 'pekko_persistence_journal_foo2'
2019-06-07  INFO - 24/24 records, previously transferred to 'pekko_persistence_journal_foo2', were successfully removed from 'pekko_persistence_journal'
2019-06-07  INFO - 74013 records were handled for suffixed collection 'pekko_persistence_journal_foo3'
2019-06-07  INFO - 74013/74013 records were successfully transferred to 'pekko_persistence_journal_foo3'
2019-06-07  INFO - 74013/74013 records, previously transferred to 'pekko_persistence_journal_foo3', were successfully removed from 'pekko_persistence_journal'
2019-06-07  INFO - 54845 records were handled for suffixed collection 'pekko_persistence_journal_foo4'
2019-06-07  INFO - 54845/54845 records were successfully transferred to 'pekko_persistence_journal_foo4'
2019-06-07  INFO - 54845/54845 records, previously transferred to 'akka_persistence_journal_foo4', were successfully removed from 'akka_persistence_journal'
2019-06-07  INFO - JOURNALS: 128959 records were handled
2019-06-07  INFO - JOURNALS: 128883/128959 records were successfully transferred to suffixed collections
2019-06-07  INFO - JOURNALS: 128883/128959 records were successfully removed from 'akka_persistence_journal'collection
2019-06-07  INFO - JOURNALS: 76/128959 records were ignored and remain in 'akka_persistence_journal'
2019-06-07  INFO -

SNAPSHOTS: Gathering documents by suffixed collection names.  T h i s   m a y   t a k e   a   w h i l e  ! ! !   It may seem to freeze, be patient...

2019-06-07  INFO - Processing suffixed collection 'akka_persistence_snaps_foo3' for 101 documents...
2019-06-07  INFO - Processing suffixed collection 'akka_persistence_snaps_foo4' for 2 documents...
2019-06-07  INFO - 2 records were handled for suffixed collection 'akka_persistence_snaps_foo4'
2019-06-07  INFO - 2/2 records were successfully transferred to 'akka_persistence_snaps_foo4'
2019-06-07  INFO - 2/2 records, previously transferred to 'akka_persistence_snaps_foo4', were successfully removed from 'akka_persistence_snaps'
2019-06-07  INFO - 101 records were handled for suffixed collection 'akka_persistence_snaps_foo3'
2019-06-07  INFO - 101/101 records were successfully transferred to 'akka_persistence_snaps_foo3'
2019-06-07  INFO - 101/101 records, previously transferred to 'akka_persistence_snaps_foo3', were successfully removed from 'akka_persistence_snaps'
2019-06-07  INFO - SNAPSHOTS: 103 records were handled
2019-06-07  INFO - SNAPSHOTS: 103/103 records were successfully transferred to suffixed collections
2019-06-07  INFO - SNAPSHOTS: 103/103 records were successfully removed from 'akka_persistence_snaps'collection
2019-06-07  INFO - METADATA: all 106 records were successfully removed from 'akka_persistence_metadata' collection
2019-06-07  INFO - Automatic migration to collections with suffixed names has completed

• in case you choose the heavy load migration (in this example, parallelism = 2):

2019-06-07  INFO - Starting automatic migration to collections with suffixed names
This may take a while...
2019-06-07  INFO -

JOURNALS: Gathering documents by suffixed collection names.  T h i s   m a y   t a k e   a   w h i l e  ! ! !   It may seem to freeze, be patient...

2019-06-07  INFO - Processing persistence Id 'foo1' for 1 documents...
2019-06-07  INFO - Processing persistence Id 'foo2' for 24 documents...
2019-06-07  INFO - Persistence Id 'foo1' result: (inserted = 1, removed = 1, failed = 0)
2019-06-07  INFO - Persistence Id 'foo2' result: (inserted = 24, removed = 24, failed = 0)
2019-06-07  INFO - Processing persistence Id 'foo3' for 74013 documents...
2019-06-07  INFO - Processing persistence Id 'foo4' for 54845 documents...
2019-06-07  INFO - Persistence Id 'foo4' result: (inserted = 54845, removed = 54845, failed = 0)
2019-06-07  INFO - Persistence Id 'foo3' result: (inserted = 74013, removed = 74013, failed = 0)
2019-06-07  INFO - JOURNALS: 128959 records were handled
2019-06-07  INFO - JOURNALS: 128883/128959 records were successfully transferred to suffixed collections
2019-06-07  INFO - JOURNALS: 128883/128959 records were successfully removed from 'akka_persistence_journal'collection
2019-06-07  INFO - JOURNALS: 76/128959 records were ignored and remain in 'akka_persistence_journal'
2019-06-07  INFO -

SNAPSHOTS: Gathering documents by suffixed collection names.  T h i s   m a y   t a k e   a   w h i l e  ! ! !   It may seem to freeze, be patient...

2019-06-07  INFO - Processing persistence Id 'foo3' for 101 documents...
2019-06-07  INFO - Processing persistence Id 'foo4' for 2 documents...
2019-06-07  INFO - Persistence Id 'foo4' result: (inserted = 2, removed = 2, failed = 0)
2019-06-07  INFO - Persistence Id 'foo3' result: (inserted = 101, removed = 101, failed = 0)
2019-06-07  INFO - SNAPSHOTS: 103 records were handled
2019-06-07  INFO - SNAPSHOTS: 103/103 records were successfully transferred to suffixed collections
2019-06-07  INFO - SNAPSHOTS: 103/103 records were successfully removed from 'akka_persistence_snaps'collection
2019-06-07  INFO - METADATA: all 106 records were successfully removed from 'akka_persistence_metadata' collection
2019-06-07  INFO - Automatic migration to collections with suffixed names has completed

Notice that records may remain in unique collections "akka_persistence_journal" and "akka_persistence_snapshot" in case your getSuffixfromPersistenceId and validateMongoCharacters methods sometimes return an empty string. In that case, an information regarding these records is printed in the console above, and a warning is also printed if inserted records does not equal removed records.

Notice that unique collections "akka_persistence_journal" and "akka_persistence_snapshot" remain in the database, even if empty. You should remove them if you want, using mongo shell...

Keep suffixed collection names feature enabled as explained in suffixed collection names usage, and of course, do not modify your getSuffixfromPersistenceId and validateMongoCharacters methods.

Keep your database safe, avoid running again the migration process, so:

• remove migration code
• remove akka-persistence-mongo-tools dependency from your build.sbt file

That's it, you should start your application and enjoy suffixed collection names feature.